LED Photoelectric Oven

The baking time and temperature setting of LED photoelectric ovens mainly depend on specific process requirements and lamp bead types. ‌‌

LED photoelectric ovens are commonly used for curing electronic components such as dot matrix, digital tubes, and LED light-emitting diodes. The temperature range is generally between -200 ℃ and 200 ℃, with a temperature stability of ± 0.5 ℃. The heating time is about 20 minutes to reach 200 ℃. The baking time depends on the specific process requirements, usually ranging from a few minutes to several tens of minutes.

When using an LED photoelectric oven, the following points should be noted:

Temperature control: Ensure that the temperature of the oven is stable within ± 0.5 ℃ to ensure consistency in the curing effect.

Time setting: Set the baking time according to the process requirements, usually ranging from a few minutes to several tens of minutes.

Power requirements: Ovens typically use a 3 ф 380VAC power supply, with voltage fluctuations within ± 10%.

By setting the baking time and temperature reasonably, the quality and performance of LED chips can be ensured to reach their optimal state.